1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. It's been bought to our attention that certain users are spamming new and existing users with links to their own websites. This is not permitted on VxON.
    Should you receive such a message, please report this using the 'Report' link you will find at the bottom of the message.
    Those users will then be dealt with accordingly.
    Dismiss Notice
  3. Use The Search Function That's what It is There For!
    The chances are that the post you are about to make has already been asked so USE the search function first! You can either search JUST this forum by clicking on the search button on the top right (under the page numbers) or click on the main search button that is on the top tool bar.
    This will save you time and stop the same duplicate posts from appearing.
    Dismiss Notice

Fitting a firetrap to a 2L

Discussion in 'Omega How to and FAQ's' started by lowrider dave, Oct 24, 2005.

  1. Dave's Vectra

    Dave's Vectra 97% Mechanic

    Messages:
    6,681
    Likes Received:
    8
    Location:
    Egham, Surrey
    Drives:
    No Vectra's
    It goes in the breather pipe which is located towards the bulkhead on the exhaust manifold side
     
  2. Dave's Vectra

    Dave's Vectra 97% Mechanic

    Messages:
    6,681
    Likes Received:
    8
    Location:
    Egham, Surrey
    Drives:
    No Vectra's
    I forgot to add, it can be purchased from Vauxhall for around £10

    the Elbow is cut in 2 or Three depandant on how well you can chop the pipe and then, slot the fire trap into the breather hose and secure with jublee clips
     
  3. boditza

    boditza New Member

    Messages:
    6
    Likes Received:
    0
    Location:
    Craiova, Romania
    nothing there.. the link isn't working anymore :(
     

Share This Page