1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.
  2. It's been bought to our attention that certain users are spamming new and existing users with links to their own websites. This is not permitted on VxON.
    Should you receive such a message, please report this using the 'Report' link you will find at the bottom of the message.
    Those users will then be dealt with accordingly.
    Dismiss Notice
  3. Use The Search Function That's what It is There For!
    The chances are that the post you are about to make has already been asked so USE the search function first! You can either search JUST this forum by clicking on the search button on the top right (under the page numbers) or click on the main search button that is on the top tool bar.
    This will save you time and stop the same duplicate posts from appearing.
    Dismiss Notice

Removing coolant sensor wiring plug

Discussion in 'Omega How to and FAQ's' started by clivette, May 20, 2016.

  1. clivette

    clivette Member

    Likes Received:
    I am struggling to get this plug off the lower side of the radiator. It has two wires and little blue tabs on the top sides. Pull, push, squeeze, wiggle, I am coming close to cutting the wires and re-joining later, (electrician)!
    Help please!

    Attached Files:

  2. andy_v

    andy_v Well-Known Member

    Likes Received:
    corsa c 1.2
    dunno but, looking at the pic, them tabs, top and bottom look promising, if ya pressed them in, try using long nose pliers, then pull.

Share This Page